BRAND NEW PALAX ( KS 35 ) FIREWOOD PROCESSOR

The PALAX series offers new top of the line firewood processors - Palax Combi MII, Palax KS35 and Palax Power100S.

Sturdy structure, good design, easy to transport, automatic high-speed valves, swinging discharge conveyor with chains, automatic tightnening of the V-belts, unobstructed and spacious splitting chute, long service intervals, safe and easy-to-use tree clamp...

Palax Combi MII and Palax Power100S comes with a circularsaw. Palax KS35 comes with a hydraulic chainsaw.

Palax KS 35 is a robust firewood processor with a 15" hydraulic chainsaw. The standard configuration comprises a 2.2 m / 86.6 in long in-feed conveyor, a 4 m / 14.1 ft long swinging and folding discharge conveyor as well as an automatic lubricator of the saw-chain. The machine is an optimal choice if the diameter of the processed trees varies a lot. The maximum cutting diameter is 35 cm / 13.8 in and the length of the log is from 25 to 60 cm / 10 in to 2 ft.

Transporting and storing the machine is really easy because of the foldable conveyor. So the machine fits into a small space.

The machine is always delivered ready assembled.

The in-feed conveyor and the discharge conveyor are equipped with easy-to-use quick-releases. In addition the discharge conveyor is fitted with a lift as standard. This means operations may be started quickly without having to use any tools.

Unobstructed and spacious splitting chute.

Clean firewood - The debris drops through the grate in the bottom of the splitting chute and as a result the processed firewood is clean and dries out quickly.

Automatic high-speed valve is standard - The automatic high-speed valve considerably speeds up the operation of the machine. Small trees are split up at high speed. While splitting thick logs, the approach stroke occurs at high speed but decelerates at the start phase of the splitting. Then, as the force requirement again decreases, the high-speed motion resumes immediately.

Precise length adjustment - The machine comes with a log-stop that always swings to the rear for the crosscut movement. This ensures the log falls unobstructed into the splitting chute. The log-stop guides are equipped with ball bearings. The length of the log can be adjusted from 25 to 60 cm / 10 in to 2 ft.

A safe and easy-to-use patented tree clamp - As the operating levers of the clamp and the saw are located at a convenient distance from each other, they are easy and effortless to operate simultaneously.

Feeding a big log to the saw - Pull the clamp to an upright position to make feeding of a big log to the saw easy.

Firm grip of the log - The turning roller of the clamp with sharp ridges helps to keep a firm grip of even small trees during cutting thus avoiding any dangerous situations and malfunctions.

Self-cleaning in-feed conveyor - The drive and return rollers of the in-feed conveyor are equipped with efficient scrapers, which keep the rollers clean under all conditions. This feature is even more significant in winter as snow is not able to gather and pack between the roller and the belt.

Reliable and easy-to-operate height adjustment of the splitting wedge

Automatic lubricator of the chainsaw - The lubricator applies lubricant to the saw-chain reliably and smoothly but only during the cutting operation.

A 4.3 m / 14.1 ft long, open and unobstructed swinging discharge conveyor.

The discharge conveyor with polyethylene scrapers, two chains and gear drive is driven by a hydraulic motor. Even high trailers can be loaded with a conveyor of standard length. As both the top and the underside of the conveyor are completely open, operations are reliable.

SPECS:

Email paul@machineking.com for freight quote or leasing information

Any additional questions contact Paul Rhoades at (704) 821-1402 or Toll Free at (866) 811-1411