Used SUPERFICI BR UV 3 Vacuum Coater and UV Oven Finishing Line 

3 or 4 sided coating

8" Max. width x 2-1/4" max. Height

8" Min. material length

Variable feed speed of 30 to 100 Feet Per Minute

COATER:

Substrate enters vacuum chamber and passes through the coating. As the substrate leaves the chamber negative pressure in the chamber keeps excess fluid inside resulting in 100% transfer efficiency. Coating is run through several filters and sent back to the reservoir for use again.

7.5 HP Regenerative vacuum producing pump, which holds fluid inside vacuum chamber, 15 gallon capacity reservoir

Stainless Steel vacuum chamber with adjustable substrate hold downs & guides, air operated diaphragm recycling pump, high capacity fluid filter, separation tower with stainless baffle and filtering system; heavy gauge steel construction, and free standing control/operator panel.

100% Transfer efficiency; coating thickness controlled with a modulating valve & vacuum pressure gauge; uses waterborne coatings be it stains, primers, sealers, basecoats, topcoats, top coats and even fungicides; can be used to coat most solid materials, regardless of shape or length.

OVEN:

3-Lamps 160 watt/cm2 (485 watts per inch) top/side (non focused), 1 bottom (focused)

7.5 h.p. regenerative blower

Variable light intensity 50% - 100%

2 access doors with viewing glass

Mylar mesh conveyor belt

Ventilating cooling system with central centrifugal fan

Aluminum reflectors

3200 CFM exhaust fan cooling system

Siemens programmable PLC touch screen

(2) 4.8 kw transformers

4 side full curing capability

For any additional questions, freight or financing contact:

Paul Rhoades at (704) 821-1402 or Toll Free at (866) 811-1411

Email:

paul@machineking.com