USED BRANDT ( KDN 340P ) EDGEBANDER

Maximum edgebanding thickness capacity: 0.016" to 1/8"  (strips or coils)

Minimum panel length: 5-1/2" 

Max. panel thickness: 5/16" min. to 2"

Minimum panel width - 2-3/8"

Automatic roll cutter and strip feed magazine

Panel edge pre-heating system

Quickmelt glue pot with 12 minute heat up time

Guillotine for cutting up to 3 mm pvc from the coil

Pressure station with (1) motorized pressure roller plus

(1) additional idle pressure roller with digital setting system

Double motor end trim with 0 to 15 degree tilting (programmed controlled indexing from straight to bevel end trimming) .25 HP 12,000 RPM

Top and bottom trim station with program controlled indexing and radius/straight inserts, .33 HP 12,000 RPM.

Top and bottom scraping unit with program controlled indexing

.12 HP top and bottom buffing station

1 HP feed motor with a fixed feed speed of 36 FPM

"PC-16" electronic programmable logic control;

Automatic height adjustment with top pressure beam for all work stations

Digital on top pressure beam for height indication

Digitals on top and bottom trim station

Electronic frequency changer for all trimming motors, which also includes electronic motor braking.

Amperage Draw: 20 amps @ 230 Volt

Dust extraction: 4" outlet, 600 CFM;

Machine Weight: 1,760 lbs.

Machine Length: 11'2"

LOW USAGE - ONLY 615 HOURS ON THIS MACHINE