USED BRANDT ( KD 56  OPTIMAT ) EDGEBANDER

Automatic magazine for strip and coil feeding

Hotmelt granulate glue application system with approximately 12 minute heatup time

Automatic reduction of glue temperature if not run within 15 minutes

This feature lowers the temperature to approximately 150 degrees C

Re-heat time is approximately 2 ½ minutes.

Reversible glue roller application

Strengthened precutter for cutting 3 mm PVC from the coil.

First pressure roller driven and one idle pressure roller equipped with digital setting system.

Double motor end trim unit for precision trimming with tilt range from 0 – 15 degrees.

Top and bottom fine trimming unit equipped with digital counter for easy changeover.

Tiltable from 0 - 15 °

Includes combination straight/3 mm radius insert cutters.

Straight cutters included packed separately.

Includes both Scraping and Buffing Units

Scraping unit with top, bottom and side tracing device for finishing thick, primarily 2mm or 3mm PVC edges.

Top and bottom buffing unit,

Workpiece support track extendable to 14” (350mm).

Electronic frequency changer for all trimming motors, which also includes electronic motor braking.