USED SCMI ( OLIMPIC MS1/88 ) EDGEBANDER

Good condition ATFS, removed functioning from a larger production plant.

Electrics 460V, 3PH, 60Hz

Edge thickness Cap. .4 - 25mm.

3mm PVC cap.

Minimum working width 4 3/4 "

Pressure section and infeed magazine with tilt 0-5 degrees for beveled edges

Hot Melt glue application system

Pneumatically controlled pressure section with (1) large drive and (6) idle rollers

Guillotine for 3.5mm PVC

1 horizontal grooving / milling station with a 4HP, 6,000 RPM motor and adjustable incline of 0-90 degrees

Double motor end trim units each with a 1.3 HP, 12,000RPM motor and pneumatically adjustable 0-20 degrees for bevel cutting

Top and bottom rough trim units each with a 2.5 HP, 12,000 RPM motor

Top and bottom fine trim and radius units each with a .7HP, 12,000RPM motor and inclinable 0-45 degrees

Corner rounding units for trimming leading and trailing upper and lower edge / corners,

4 units with .8HP, 14,400 RPM motors

Top and bottom PVC scraping unit for radius banding with oil misting device.

Top and bottom buffing units with .3HP, 3,000RPM motors, inclinable 0-30 degrees

Leister hot air activation unit.

Variable feed speed of 20-115 FPM

5HP feed drive Pressure beam with double row of holddown rollers

Sound deadening enclosures with windows and interior lights

Heavy duty outrigger panel support