USED HOMAG ( OPTIMAT KL 74/A3 ) EDGEBANDER

Powered top pressure rise and fall -

Powered double "V" belt top pressure -

Homatic NC 21 Windows compatible programmable controller -

Pictogram diagnostics on controller screen -

Telephone trouble shooting -

Electronic frequency converter on all machining heads -

Coil feed for material up to 3mm -

Sound enclosure for all machining heads -

WK03 double motor high speed end trims for straight or angle cutting with pneumatic changeover -

Free space for fitting of addition units -

Outrigger support adjustable to 800mm -

Dust extraction through the base of the machine -

Back-off of glue roller and edging feed in case of feed chain stop -

80mm (3.15") wide rubber covered feed chain on hardened guideways -

Magnetic braking on the feed motor -

Feed from 18 to 35m/m (59 to 115`/m) -

Minimum working width 55mm -

Maximum part overhang of 30mm -

Part thickness 12 to 60mm -

Coil edging from .3 to 3mm -

Maximum coil diameter of 830mm -

QA34 gluing unit -

Granule glue reservoir -

Electronic glue temperature control -

Reversible glue applicator roller -

2 vertical coil edging magazine with automatic changeover on completion of a coil -

Pneumatic pressure roll section with 1 powered pressure roller 150mm diameter and 2 idle rollers 70mm -

12,000rpm angled or straight end trims -

2 powered rubber in-feed rollers angled toward the fence line -

KL70 automatic chain lubrification -

3.5mm maximum edge thickness -

350mm between panels -

2 X 1.5kw 12,000rpm top and bottom rough trim unit -

Height adjustment with top pressure beam -

2 X .4kw 12,000rpm top and bottom fine finish trim units -

Pre-disposition for addition of 3mm profile scrapers -

Top and bottom oscillating buffers -

Top buffer adjusts for height with top pressure beam