This single sided Softformer/Bander has never been put into production.

It is a 2002, but IT IS NEW 

Banding from .4 to 3mm from coils and up to 20mm with strips

For panels 7 to 60mm thick

Minimum piece width 85mm to 22mm thick and 125mm to 60mm thick 

Max panel overhang of 50mm 

Adjustable infeed fence on right side with digital readout 

HOMATIC NC21 line control 

Windows environment with PC compatible keyboard and Ethernet connectability 

Memory for 40 programs with 160 functions per program for controlling units 

Autolube track 

Variable feed from 12 to 32 m/min 

Powered double top pressure belts with powered height adjustment 

Devices include Top separating agent spray dispenser, 2 tiltable 9,000RPM 4HP milling heads with first head jumping

Panel cleaning air blowers

Panel preheat unit

Hot melt glue system for both softforming and straight banding

Premelt hopper for granular

Glue application to either panel edge or edging material

Coil and strip feeding for coils to 3mm and strips to 20mm

4 station pressure zone for straight plus 3 profiles (straight and 1 profile included)

Cooling blower at outfeed of pressure zone

End trim station with 2 X 12,000RPM .5HP motors

Top and bottom fixed rough trims with 2 X 12,000RPM 2HP motors

Top and bottom tilting fine trims with 2 X 12,000RPM .5HP motors

End plus top and bottom trim units all HF

Open space for future addition of sanding units

Adjustable outrigger up to 800mm

Sound enclosures with windows

Built in chip removal system