0.4 - 3 mm Edge thickness cap.

Min. panel width 55 mm for Panel thickness 12-22mm 

Min. panel width 100 mm for panel thickness over 22-60 mm

Feed speed 59 - 82 FPM 

Servo Controlled Positioning infeed fence through the controller

Pre-Milling Station #3481: (2) 3 KW-150 Hz, 9,000 RPM Motors,(2) jointing cutters (d=125 x 35 x 30mm), Panel blow off device; SIKO digital counters for adjustments 

"Quick Melt" glue system "QA 34" unit #3123: Pre-melt hopper feeder & roller applicator (reversible); Servo Controlled pressure roll section with (1) large dia. driven & (2) idle rollers; Adjusting Pressure Zone through SIKO controls for different edge thicknesses; (2) Coil magaizine for quick changeover of banding selection

Workstations:

"HL-05" Double end trim/snip: (.22 Kw - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel; Snipping for 0-30° angle

Open Space for later addition of Top/Bottom Trim Rough trim 

Top/Bottom Fine Trimming station: (0.6 HP - 12,000 RPM) tiltable 0°-30° for bevel or radius trimming

Top/Bottom Buffing unit #4400

Line control with HOMATIC "PC 22" controller with LCD Flat scren, Graphical user interface for easy & comfortable operation and programming; Real-time operating system, functions in Windows environment; PLC w/storage for (40) working programs, each with (160) functions for remote control of processing units; keypad w/LCD display, fault diagnostic, etc.; Diagnostic analysis from HOMAG via Modem

Complete with:

SIKO Digital adjustments

Electronic DC brakes on all trim motors

Sound cabins for all trim workstations

Adjustable outboard panel support

80mm Feed track pads & V-Groove belt on Top pressure beam

Owner's manual, parts book and service records provided