Large coil table for roll material

Automatic roll cutter & strip feed magazine

Quick changeover for rolls or strip material

Standard guillotine for cutting up to 2.5mm PVC from the coil

Quickmelt glue pot with quick change disconnect for ease of maintenance or glue color change if required.

10-15 minutes heat-up time (depending upon voltage)

Digital thermostat with approaching temperature control

PDI and auto temperature drop

Control panel located on in-feed end of machine for easy access

Pressure station with one motorized pressure roller plus 2 additional pressure rollers

End trim station, single motor with double blade motor

Top & bottom tiltable trim station equipped with digitals and straight insert tooling (for flush & bevel trimming)

Buffing station Electronic programmable logic control

Disposable carbide insert tooling for surface trimmers

Digital on top pressure beam for height indication

Digital on pressure station

Digitals on top & bottom trim station

Fixed speed at 33 feet per minute 220 volt / 3 phase (+/- 5%, depending on voltage)

Manufacturers Original Specifications

Coil Cutoff maximum: 2.5 mm

PVC Edgeband thickness max: 3/16" solid wood

Panel length min: 5" (120 mm)

Panel width min: 3" (75 mm)

Panel thickness min: 3/8" (8 mm)

Panel thickness max: 2" (50 mm)

Feed speed: 33 fpm

Feed motor: 1 hp / .75 kw

Pressure section: motorized roller w/2 additional rollers

End trim unit: 1/3 hp / .27 kw

Tooling speed: 12,000 rpm

Straight cut max: 3/16 " X 2 1/4"

Top & bottom trim station: + 1/2 hp / .55 kw

Tilting range: 0 - 20° 

Total power required (amps): 24 amps @ 230 volt

3 phase Machine

Length: 10'-3" (3110 mm)

Machine width: 56" - 80" depending on outrigger position 

Working height: 36" Total

height: 57" (1440 mm)

Machine weight: 1,870 lbs.