USED BRANDT ( OPTIMAT KD67/2 ) EDGEBANDER

EDGEBANDER ONLY 1,100 HOURS

PC-16 Program Control:

 Color matrix LCD screen display Color matrix LCD screen display

8mb RAM

Manual push button controls or program control operation

Equipped with digital height indicator.

Integrated electronic line control system for increased reliability and diagnostic assistance.

No limit switches used for setting operating units.

Universal automatic magazine for strip and coil feeding.

Large coil table (800 mm diameter) to accommodate large coils of 3 mm PVC.

Hot melt granulate glue application system with approximately twelve minute heat-up time.

Quick-change glue tank for easy maintenance and glue color change, if necessary.

Reversible rotation of glue application roller. Retractable glue roller.

Strengthened precutter for cutting PVC (max. 3 x 45 mm) from the coil.

Infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength.

First pressure roller driven and two idle pressure rollers.

Double motor end trimming unit with straight and chamfer capability.

Chamfer up to 15°.

Program controlled indexing from straight to bevel.

Fine trimming unit #1with digital “Quickset” system. Tilt range 0-15°  Program controlled indexing.

Fine trimming unit #2 with digital “Quickset” system. Tilt range 0-15°. Program controlledindexing.
 

Scraping unit with program controlled indexing.

Sound enclosure with centralized dust extraction outlet.

Buffing unit.

Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes.
 

Electrical components according to UL/CSA Listings.

Technical Specifications

Edgeband thickness 0.4 - 8 mm (0.016" - .375") ( 5/16”)

Coil cutoff maximum 0.8 x 45 mm

3.0 x 45 mm (PVC)

Edgeband height 12 - 45 mm (1/2" – 1 ¾”")

Panel length min. 160 mm (6 3/8")

Panel width min. 65 mm (2 3/8")

Panel thickness

Min. 8 mm (5/16")

Max. 40 mm (1 5/8")

Feed speed 11 m/min (36 FPM)

Feed motor 2.2 kw (3 HP)

Pressure section First roller driven, two rollers idle

End trim unit - two motors .27 kw (1/3 HP) Cutting speed 12,000 RPM

Straight cut max. 5 x 45 mm (3/16" x 1 3/4")

Fine trimming unit #1 .40 kw (1/2 HP ea) Tilting range 0 - 15° Cutter speed 12,000 RPM

Fine trimming unit #2 .40 kw ( ½ HP ea ) Tilting range 0 – 15° Cutter speed 12,000 RPM

Electronic frequency changer Total power required 6 kw 

Amperage @ 230 40 amps, @ 460 20 amps

Machine length 5240 mm (17’2”)

Machine width 1730 mm (68")

Working height 900 mm (35.5")

Total height 1600 mm (63")

Machine net weight (with all stations full) 1750 kg (3850 lbs)

Dust extraction:

1x 100 mm (4")

1x 140 mm ( 4 ¾”) 1200 CFM.

Compressed air connection: 0.18 CFM per panel, 6 bar (85 PSI).

Leasing options available too

Can't find the machine you're looking for? email me and I will find it for you.