USED BIESSE ( STREAM B1 6.5 ) EDGEBANDER

3 to 3 mm edge banding thickness in coils; 12 mm edge banding thickness in strips; panel thickness 10 to 60 mm; min. panel length 4"; NC410 deluxe controller with keyboard and screen; motorized top pressure beam positioning with numerical digital readout (pressure beam has hold down belts instead of rollers); infeed fence with digital readout and pre-heating of panel edge; automatic loader for coiled edge banding and automatic feed magazine for strips; heavy duty guillotine for 3 mm; overhead granular hot melt gluing unit with pre-heater; pressure section consists of (1) large driven roller and (6) idle rollers, all NC Y-axis controlled; (2) 3/4 HP12,000 RPM end trims with automatic tilting 0 to 25 degrees; (2) 2.41HP 12,000 top and bottom rough trims with straight flush cutters; (2) 1/2 HP 12,000 RPM top and bottom fine trims with automatic adjustment of tool position to pre-set positions with respect to the material using (automatic pneumatic disabling of the unit); top and bottom profile/bevel scraping unit for 3 mm PVC; (2) 1/4 HP 1,400 RPM top and bottom oscillating buffing units; top and bottom hot air blowers; variable speed feed speed up to 78 FPM; all high frequency motors powered by a varispeed inverter.